Checking The Wheel Bearing For Play; Checking The Brake Discs - Husqvarna FC 250 2018 Repair Manual

14 WHEELS
14.3
Warning
-
116
Checking the wheel bearing for �la�
Checkin the brake discs
Worn-out brake discs reduce the braking effect.
Danger of accidents
Make sure that worn-out brake discs are replaced immediately.
( _ _A\
,,.-·· � ·-....
\._____
H00938-10
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Place a load on the rear of the vehicle.
✓ The front wheel is not in contact with the ground.
Main work
-
Move the front wheel from side to side.
Info
Hold the fork leg to check it.
If there is detectable play:
-
Change front wheel bearing.
-
Place a load on the front of the vehicle.
✓ The rear wheel is not in contact with the ground.
-
Move the rear wheel from side to side.
Info
Hold the link fork to check it.
If there is detectable play:
-
Change the rear wheel bearing.
Finishing work
-
Remove the motorcycle from the lift stand.
-
Check the front and rear brake disc thickness at multiple
points for the dimension 6).
• Info
I
Wear reduces the thickness of the brake disc around
/
.. the contact surface of the brake linings.
__
Brake discs - wear limit
front
rear
If the brake disc thickness is less than the specification:
-
Change the front brake disc.
-
Change the rear brake disc.
-
Check the front and rear brake discs for damage, cracking,
and deformation.
(8 p. 12)
(8 p. 120)
(8 p. 132)
(8 p. 12)
I 2.5 mm (0.098 in)
I 3.5 mm (0.138 in)
(8 p. 120)
(0 p. 124)