14 WHEELS
98
» If the tread depth is less than the minimum tread depth:
- Change the tires.
Check the tire age.
Info
The tire date of manufacture is usually contained in the tire label and is
indicated by the last four digits of the DOT number. The first two digits
indicate the week of manufacture and the last two digits the year of manu
facture.
Husqvarna Motorcycles recommends that the tires be changed after 5
years at the latest, regardless of the actual state of wear.
I
1215
o°^
H01144-10
If the tires are more than 5 years old:
- Change the tires.
14.3
Checking the wheel bearing for play
Preparatory work
-
Raise the motorcycle with the work stand, (fii p. 12)
-
Place a load on rear of vehicle.
The front wheel is not in contact with the ground.
Main work
-
Move the front wheel from side to side.
%
ji
Info
Hold the fork leg to check it.
I
If there is detectable play:
- Change the front wheel bearing. (iH p. 103)
D02835-10
\
Place a load on the front of the vehicle.
The rear wheel is not in contact with the ground.
Move the rear wheel from side to side.
y
Info
Hold the swingarm to check it.
I
A
If there is detectable play:
- Change the rear wheel bearing. (fiS p. 107)
D02836-10
Finishing work
- Remove the motorcycle from the work stand. ( P- 12)
Checking the brake discs
14.4
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
- Make sure that worn-out brake discs are replaced immediately.
A
Check the thickness of the front and rear brake discs at multiple points on each
brake disc to ensure it is at least thickness
©
A
fl
• Info
Wear will reduce the thickness of the brake disc at the contact surface O
of the brake linings.
O
Brake discs - wear limit
4.5 mm (0.177 in)
Front
400406-10
4.5 mm (0.177 in)
Rear