Writing Data To Flash Memory - Omron SYSMAC W398-E1-1 Operation Manual

Writing Data to Flash Memory

7-4

Writing Data to Flash Memory

!Caution Back up the data to flash memory after transferring parameters or other data
78
5. The following screen will be displayed when verification has been complet-
ed. Click the Close Button to end verification.
The following screen will be displayed if there is a failure during the verifi-
cation process. Click the Close Button to halt verification.
PC setting is 1.
Use the following procedure to write all, or specified, data in the NC Unit to
flash memory.
to the NC Unit. If parameters and other data are not backed up to flash mem-
ory, settings will revert to their previous values the next time power is turned
ON, possibility resulting in incorrect operation
NC Unit setting is 0.
Shows that an error has
occurred during an X-axis
Origin Search Operation.
Section 7-4