Writing Ladder Programs - Omron ZEN Operation Manual

Creating Ladder Programs
STOP mode
display
3-3-3

Writing Ladder Programs

STOP mode
display
Press the OK Button to switch to the Menu
PROGRAM
RUN
Screen and select PROGRAM.
PARAMETER
SET CLOCK
▼
Select DELETE PROG.
EDIT PROG
DELETE PROG
If a password has been set, a Password
Input Screen will be displayed. Input the
password.
Press the OK Button to display a
DELETE PROG
DELETE?
confirmation message, and then select YES.
NO
YES
When the Delete Program operation has
EDIT PROG
DELETE PROG
been completed, the display will return to the
original screen.
Press the OK Button to switch to the Menu
PROGRAM
RUN
Screen and select PROGRAM.
PARAMETER
SET CLOCK
▼
Select EDIT PROG.
EDIT PROG
DELETE PROG
Press the OK Button to display a
EDIT
EDIT?
confirmation message, and then select YES.
NO
YES
▲ ▼
Press the OK Button to switch to the Ladder
Program Edit Screen.
Indicates the line number in the ladder
▼
program at the cursor position (line 0 in this
example.)
Cursor flashing in a reversed state.
Section 3-3
61