Saving Projects - Omron SYSMAC W398-E1-1 Operation Manual

Saving Projects

5-1 Saving Projects
5-1-1 Saving a Project
To Save a Project Under a
New Name
1,2,3...
64
To save a project, select File/Save Project (Ctrl+S) to resave an edited
project under the same name or File/Save Project As (Ctrl+A) to save a new
or existing project under a new name.
1. Select File/Save Project As to display the Save As Window.
2. Enter the folder to be saved in, or select one by clicking on the arrow to ex-
pand the drop-down list. (The folder into which CX-Position was installed
will be the default folder.) Enter or select the file name, and the Save as file
type (CX-Position default file type: *.nci) and press the Save Button.
Section 5-1