Automatic Nc Unit Search - Omron SYSMAC W398-E1-1 Operation Manual

Automatic NC Unit Search

3-4

Automatic NC Unit Search

1,2,3...
42
When online, data from all the NC Units mounted in the online PC can be read
to automatically create NCs within a specified PC. At the same time, all the
data read from the NC Units of the specified PC can added as project data.
1. Create a PC by either select Edit/New PC, or right-click and select New
PC from the pop-up menu.
2. Select the PC from the project tree and then select Online/Automatic NC
Search.
The Automatic NC Search Dialog Box, shown above, will be displayed.
3. Click the data upload checkbox to read all the data from the NC Units.
4. Click the OK Button to create NCs automatically. If there is data to be up-
loaded, the following window will appear.
If there is no data to be uploaded, the following window will appear.
Section 3-4