Reading Projects - Omron SYSMAC W398-E1-1 Operation Manual

Reading Projects

5-2 Reading Projects
5-2-1 Reading a Project
1,2,3...
5-2-2 Importing C200HW-NC@@@
1,2,3...
Select File/Open (Ctrl+O) to open a saved project.
1. Select File/Open.
2. From the Look in drop-down list, select the drive and folder to which the
project was saved.
3. Enter the project name, or select one from the file list. Set the Files of type:
field to *.nci.
4. Click the Open Button.
@@@ @@@ NC Settings @@@
C200HW-NC@@@ data created using the SYSMAC-NCT can be imported as
NC project data.
1. Select File/Import.
2. From the Look in drop-down list, select the drive and folder to which the file
to be imported was saved.
3. Enter the file name, or select one from the file list. Set the Files of type field
to *.ncm.
4. Click the Open Button.
Section 5-2
65