Switching Setting Display Formats; Clearing Settings - Omron SYSMAC W398-E1-1 Operation Manual

Setting Editing Screens
To Move the Screen
4-2-3

Switching Setting Display Formats

Switching the Current
Settings Display Format
Switching the Settings
Display Format on Startup
4-2-4

Clearing Settings

To Clear to Default
Settings
1,2,3...
To Clear Setting Ranges
Settings that cannot be displayed in a single screen can be viewed either by
pressing the PageDown Key or by using the scroll bar on the right-hand side
of the screen.
Settings on any Setting Editing Screen can be displayed in either hexadecimal
or decimal format.
Switch the display format by selecting Hexadecimal or Decimal under View/
Change Display on the Setting Editing Screen or by right-clicking and select-
ing Hexadecimal or Decimal from the pop-up menu.
Example: The following screens will be displayed for speed settings in hexa-
decimal (right) and decimal (left) formats
Decimal Notation
Set the display format when starting up CX-Position by selecting Tools/
Options/Default Display Format. Decimal is the default display format. To
switch to hexadecimal display, select the Hexadecimal Display option.
Set parameter settings can be made into default settings and non-parameter
setting ranges can be cleared.
Use the following procedure to clear axis settings to their default values.
1. With the Parameter Setting Editing Screen enabled, either select Edit/De-
faults Setting, or right-click and select Defaults Setting from the pop-up
menu.
2. Select the axis for which settings are to be cleared to the defaults.
3. Click the OK Button.
4. A dialog box will be displayed asking if the settings should be returned to
their default values. Click the OK Button.
Non-parameter settings can also be cleared.
Section 4-2
Hexadecimal Notation
53