Omron SYSMAC W398-E1-1 Operation Manual page 63

Setting Editing Screens
To Display the
Acceleration/Deceleration
Editing Screen
1,2,3...
To Display the Dwell Time
Editing Screen
1,2,3...
2. The following screen will be displayed.
1. Under the NC on the project tree, either double-click Edit Accel/Decel, or
select it and press the Enter Key
2. The following screen will be displayed.
1. Under the NC on the project tree, either double-click Edit Dwell Time, or
select it and press the Enter Key
Section 4-2
49