Omron SYSMAC W398-E1-1 Operation Manual page 29

Connecting to a PC
Connecting Cables
Unit Port on
Unit
CPU Unit Built-in IBM PC/AT
peripheral or
port compatible
Built-in
RS-232C
port
(D-SUB,
9-pin,
female)
Serial RS-232C
Communi- port
cations (D-SUB,
Board/Unit 9-pin,
female)
Other Connection
Methods
Connecting RS-232C
Cable to Peripheral Port
Unit Port on Computer
Unit
CPU Unit Built-in IBM PC/AT
peripheral or
port compatible
Connecting
CQM1-CIF01/02 to
Peripheral Port
Unit Port on Computer
Unit
CPU Unit Built-in IBM PC/AT
peripheral or
port compatible
Computer Port on
computer
D-SUB, 9- Serial Unit
pin, male
Note When connecting the connectors of the above cables to the PC's RS-232C
port, discharge any static build-up (e.g., by touching a grounded metal object)
before touching the connectors. Although XW2Z-@@@S-CV Cables use the
anti-static XM2S-0911-E Connector Hood (thus reducing the possibility of
static build-up), be sure to discharge any static as a safety precaution.
The following connection methods can be used when connecting an RS-232C
cable to the peripheral port.
Port on FinsGateway
computer communica-
tions driver
D-Sub, 9- Serial Unit
pin, male
The following connection method can be used when connecting the conven-
tional CQM1-CIF01/02 Cable to the peripheral port.
Port on FinsGateway
computer communica-
tions driver
D-Sub, 9- Serial Unit
pin, male
FinsGateway Protocol (serial
communica- communica-
tions driver tions mode)
SYSWAY-CV
Protocol (serial
communica-
tions mode)
SYSWAY-CV
Protocol (serial
communica-
tions mode)
SYSWAY-CV
Section 2-2
Model Length Remarks
number
CS1W- 2.0 m ---
CN226
CS1W- 6.0 m
CN626
XW2Z- 2 m Uses
200S-CV anti-static
connector
XW2Z- 5 m
500S-CV
XW2Z- 2 m Uses
200S-CV anti-static
connector
XW2Z- 5 m
500S-CV
Model Length Remarks
number
CS1W- 0.1 m The
CN118 + (2 m or XW2Z-
XW2Z- 5 m) @@@S-CV
200S-CV/ uses an
500-CV anti-static
connector.
CS1W- ---
CN118 +
XW2Z-
200S-V/
500-V
Model Length Remarks
number
CS1W- 0.5 m + ---
CN114 + 3.3 m
CQM1-
CIF02
15