Operating Data Area Monitoring - Omron SYSMAC W398-E1-1 Operation Manual

Operating Data Area Monitoring

8-4

Operating Data Area Monitoring

1,2,3...
84
The following table shows the operating memory area words that aredis-
played.
Data
NC1@ @ @ @ 3
X axis
Command 1 n
Command 2 n+1
NC status n+2
External I/O n+3
status
Error codes n+4
Refer to the Operation Manual for the NC Unit for details on bit allocations.
Use the following procedure to monitor the operating data area (Special I/O
Unit words allocated in the DM Area or custom DM/EM Area) allocated to the
PC.
1. On the project tree, select the NC Unit for operating data area monitoring.
2. Select Online (L)/Online Monitor NC Operating Data Area.
Allocated words
NC2@ @ @ @ 3
X axis Y axis X axis
n n+2 n
n+1 n+3 n+1
n+4 n+7 n+8
n+5 n+8 n+9
n+6 n+9 n+10
Section 8-4
NC4@ @ @ @ 3
Y axis Z axis U axis
n+2 n+4 n+6
n+3 n+5 n+7
n+11 n+14 n+17
n+12 n+15 n+18
n+13 n+16 n+19