Operating Memory Area Monitoring - Omron SYSMAC W398-E1-1 Operation Manual

Operating Memory Area Monitoring

8-3

Operating Memory Area Monitoring

1,2,3...
Example: The following will be displayed as the 4-axis NC Unit Monitor
Units Screen.
The sequence number and current position for each axis are displayed.
Use the following procedure to monitor the operating memory area (Special I/
O Unit words allocated in the CIO Area) allocated to the PC.
1. On the project tree, select the NC Unit for operating memory area monitor-
ing.
2. Select Online (L)/Online Monitor NC Operating Memory Area.
3. Select either Automatic or Manual to start monitoring. Automatic continues
monitoring until the Stop Monitor Button is clicked. Manual refreshes the
monitor screen contents.
Section 8-3
83