Connecting Via Host Link (Sysway-Cv) - Omron SYSMAC W398-E1-1 Operation Manual

Connecting to a PC
1,2,3...
2-2-1

Connecting via Host Link (SYSWAY-CV)

Connection Method
14
1. Select Programs/FinsGateway/FinsGateway Settings from the Start
Menu.
2. Select the desired communications driver under Driver under Network on
the Basic Tab Page, click Properties, and make the required settings
(COM port used, communications protocol (see note), communications
conditions, etc.).
Note For example, select SYSWAY-CV to connect via Host Link
(SYSWAY-CV).
3. Select the desired communications driver (service) under Services on the
Basic Tab Page, and click the Start Button.
To connect via Host Link, use FinsGateway Version 3's Serial Unit driver. Use
Host Link (SYSWAY-CV) to connect to the PC's peripheral port or RS-232C
port.
Computer
Connection to peripheral port
IBM PC/AT
or
compatible
CS1W-CN118 (See note.)
CS1W-CN226
CS1W-CN626
Note Use the CS1W-CN118 to connect to the peripheral port of the CPU Unit using
one of the RS-232C cables shown on the right (XW2Z-@@@@-@@) in the way
shown below.
Note With CS/CJ-series PCs, it is also possible to connect to ports on Serial Com-
munications Units/Boards. In this case, connection can be made by Host Link
only.
9 pin,
male
9 pin,
female
Peripheral port
10 pin, female
CS1W-CN118 (0.1 m) (See note.)
CS1W-CN226 (2.0 m)
CS1W-CN626 (6.0 m)
9 pin, female 10 pin
RS-232C cable
CS1W-CN118
Section 2-2
Connection to RS-232C port
9 pin,
9 pin, male
male
RS-232C port
9 pin, female
XW2Z-200S-CV/200S-V (2.0 m)
XW2Z-500S-CV/500S-V (5.0 m)
XW2Z-200S-CV/200S-V
XW2Z-500S-CV/500S-V
9 pin, female 9 pin, male
Peripheral port