Installation Guide
5.3 Rails Installation
This procedure provides instructions for installing the rails for an Ultrastar Data60 .
Before you begin: Complete the instructions in
Note: For CMA Lite only
vertical rack rails. The intent of CMA Lite is to reposition the enclosure closer to the front of the
rack to create a more centered enclosure.
Table 27: Installation Requirements
Tool(s):
Part(s):
Person(s):
Time:
Cable Tray Installation (Optional) (page 29)
: Ensure that the rack has about 2.5in. of extra space in front of the
# 2 Philips Screwdriver with torque measurement capability
Long T15 Torx Screwdriver
Rails Kit 1EX0436 (CMA Standard)
Low-Profile M4 x 3.2mm Philips screws
M5 x 12mm T15 Flat Head Torx screws
Screw plate (optional)
1
30 minutes
5. Installation
5.3 Rails Installation
.
31