Alcatel-Lucent 1665 Installation Manual page 345

Installation checklist
Section and Chapter
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
Procedure
Setting DS3/EC1 and TMUX LBOs (p. 4-5)
Clearing alarms (p. 4-7)
Local equipment and cross-connect tests (p. 4-9)
DS1 terminating equipment loopback testing
(p. 4-10)
DS1 non-terminating equipment transmission
testing (optical main OLIU) (p. 4-11)
DS1 protection switching (p. 4-14)
DS1 function unit protection switching test
(manual) (p. 4-14)
DS1 function unit protection switching test
(command) (p. 4-15)
DS1 path switching test (manual) (p. 4-16)
DS1 cleanup procedures (p. 4-18)
Delete any existing DS1 cross-connections (p.
4-18)
Verify cross-connects removed (p. 4-21)
DS3/EC1 and TMUX testing procedure (p. 4-22)
Verify provisioning (p. 4-22)
DS3 terminating equipment loopback testing
(optical main OLIUs) (p. 4-23)
DS3 non-terminating transmission (optical
main OLIU) (p. 4-26)
DS3 protection switching (p. 4-28)
DS3 function unit protection switching test
(manual) (p. 4-28)
DS3 function unit protection switching test
(command) (p. 4-29)
DS3 path switching test (command) (p. 4-30)
DS3 cleanup procedures (p. 4-32)
Overview
Completed
Required Yes No
See Note 1
Yes
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
E - 5