Tmux Cable Routing - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Figure 1-17
Important!
cable routing reference only.
........................................................................................................................................................................................................................
Route the cables along the cable rack and into the terminating bay (DSX or other
4
terminating transmission equipment).
........................................................................................................................................................................................................................
Cut the cables to desired length and install the BNC connectors shipped with the cable
5
assemblies.
Important!
carefully to ensure a proper connection. Failure to do so may result in faulty DS3
signals as a result of improperly installed BNC connectors.
........................................................................................................................................................................................................................
Connect the cables to their respective positions on the terminating equipment.
6
............................................................................................................................................................................................................................................................
1 - 5 6

TMUX cable routing

TMUX
Cables
The shelf depicted above is a 1665 DMX standard shelf and is used for
When installing BNC connectors, follow the manufacturer's instruction
12TMUX (LNW18) cable installation
365-372-304R7.1
Issue 1, November 2007