Pluggable Transmission Module Installation - Alcatel-Lucent 1665 Installation Manual

About this document
Part IV: "1665 Data Multiplexer (1665 DMX) supplementary information and
installation checklist"
Appendix A, "Laser safety and classifications and Electrostatic Discharge (ESD)
considerations"
This appendix provides lightwave and laser safety information and precautions.
Appendix B, "Fiber cleaning"
This appendix describes the Lucent recommended method for the cleaning and inspection
of optical connectors using specific tools and materials that have been proven to be
effective in the assembly and testing of optical equipment.
Appendix C, "Installing fiber connectors and LBOs"
This appendix provides procedures for installing and removing the types of Line Build
Out (LBO) units and fiber connectors onto input and output ports found on the 1665 DMX
circuit packs.
Appendix D, "Backplane pin replacement"
This appendix provides information and the procedures used when a pin or blade on the
1665 DMX backplane has been bent or broken.
Appendix E, "Installation checklist"
This appendix provides a checklist to ensure that all necessary procedures have been
completed. Use of the installation checklist is required to ensure a quality installation, all
completed tasks should be checked off and those not completed should be duly noted as to
the reason why. This checklist should be turned in as part of your job complete paperwork.
Appendix F, "Fiber labeling"
This appendix provides
Appendix G, "Pluggable transmission module installation"
Provides examples of various SFP installation.
Appendix H, "Technical support"
This appendix provides information on Technical Support Services.
Glossary
The Glossary provides definitions for telecommunication acronyms and terms.
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
a description of how to label the fiber.
x i x