Alcatel-Lucent 1665 Installation Manual page 226

Installation tests
........................................................................................................................................................................................................................
Choose the CP fn circuit pack that applies.
10
........................................................................................................................................................................................................................
Click Select.
11
........................................................................................................................................................................................................................
Enter VLAN ID:100
12
........................................................................................................................................................................................................................
Choose Virtual Switch:1
13
........................................................................................................................................................................................................................
Under "Untagged Traffic" click on Select All.
14
........................................................................................................................................................................................................................
Click Apply.
15
........................................................................................................................................................................................................................
16 Connect a RJ45 Ethernet cable from the LAN port on the LNW2 SYSCTL to the first
position on the RJ45 Ethernet patch panel.
........................................................................................................................................................................................................................
Connect a second RJ45 Ethernet cable from the PC Ethernet port to the second position on
17
the RJ45 Ethernet patch panel.
........................................................................................................................................................................................................................
18 Watch for the link LED to light on the PC's Ethernet card or wait for 30 seconds.
........................................................................................................................................................................................................................
Login to the shelf using the OSI connection.
19
Result:
........................................................................................................................................................................................................................
Log out of the 1665 DMX shelf.
20
........................................................................................................................................................................................................................
At the RJ45 Ethernet patch panel disconnect the RJ45 Ethernet cable run to the PC
21
Ethernet port and connect it to the next position on the RJ45 Ethernet patch panel to be
tested.
............................................................................................................................................................................................................................................................
4 - 3 8
Successful login to the 1665 DMX.
LNW66, LNW71 and LNW74 (10/100T) TX Ethernet
cabling testing
365-372-304R7.1
Issue 1, November 2007