Alcatel-Lucent 1665 Installation Manual page 176

Software download and circuit pack installation
................................................................................................................................................
Attach the fiber bracket to the blank pack with the hardware provided.
9
Important!
position.
................................................................................................................................................
If there are any FAULT LEDs on or flashing on any of the inserted circuit packs, press the
10
UPD/INIT pushbutton on the SYSCTL circuit pack.
Result:
update the system and should clear all standing alarms.
................................................................................................................................................
If FAULT LEDs remain lit on any of the inserted circuit packs, replace the respective
11
circuit pack.
................................................................................................................................................
Any other alarms will be cleared later on in this chapter.
12
................................................................................................................................................
Check off the appropriate box in
13
E O
N D
........................................................................................................................................................
........................................................................................................................................................................
3 - 8
The bracket must be positioned with the LC openings in the down
The operation of the UPD/INIT pushbutton on the SYSCTL circuit pack will
S
F T E P S
Appendix E, "Installation
Circuit pack installation
checklist".
365-372-304R7.1
Issue 1, November 2007