Standard Cit Cable Connections; Rj-45 To Db-9 Connector Connections - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Table 1-25
Connection
Front CIT cable
Notes:
1. The connection and the colors shown above are for a standard Lucent made cable. If
you use a RJ-45 to DB-9 connector with a standard straight-through 10BaseT LAN
cable, refer to
Table 1-26
............................................................................................................................................................................................................................................................
1 - 9 8

Standard CIT cable connections

RJ45 connector
Pin# Designation
1 FRS232N
3 FDTR
4 Ground
5 FTXD
6 FRXD
Table 1-26, "RJ-45 to DB-9 connector connections" (p.

RJ-45 to DB-9 connector connections

From RJ45
connector
Pin# Color
1 Blue
3 Black
4 Red
5 Green
6 Yellow
Notes:
1. The connection and the colors shown above are for RJ-45 to
DB-9 connector.
2. This connector should be used with a standard straight-through
cable which has all 8 wires connected.
9-Pin D-type connector
Color Pin#
W - O 6
W - BL 4
W - G 5
O 2
G 3
To 9-pin D-type
connector
Pin#
6
4
5
2
3
CIT cable installation
Designation
DCE Ready
DTE Ready
Ground
Receive Data
Transmit Data
1-98).
365-372-304R7.1
Issue 1, November 2007