Machine Connection Method (Lpd/Raw) - Canon imageCLASS MF7460 Reference Manual

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Machine Connection Method (LPD/Raw)

■
Connecting to a TCP/IP Network:
●
All computers that use the machine must have TCP/IP client
software installed and must be enabled for TCP/IP network use. For
details, see the manuals provided with the operating system.
Installing the Printer Driver and Specifying the Machine
●
Destination Setting:
To print from a computer, you must install a printer driver and
specify a setting for the machine destination. The machine
destination setting differs depending on the print application used
for printing. Use the following information as a guide to determine
the print application you are using, and then perform the necessary
operations.
– LPD: This is the print application generally used with TCP/IP.
– Raw: This is a print application used with Windows 2000/XP/
Server 2003/Vista. It can print at higher speeds than LPD.
In the following procedures, items displayed on the screen for Windows XP
are used; items might differ depending on your operating system.
1.
Open the printer properties dialog box.
– For Windows Vista, click [Start] on the Windows task bar →
[Control Panel] → [Hardware and Sound] → [Printer].
– For Windows 2000, click [Start] on the Windows task bar →
[Settings] → [Printers].
– For Windows XP Professional/Server 2003, click [start] on the
Windows task bar → [Printers and Faxes].
– For Windows XP Home Edition, click [start] on the Windows
task bar → [Control Panel] → [Printers and Other Hardware] →
[Printers and Faxes].
2.
Right-click the icon of the printer you installed
→ select [Properties].
Back Previous
3.
Display the [Ports] sheet by clicking the [Ports]
tab.
4.
Open the [Printer Ports] dialog box by clicking
[Add Port].
5.
From [Available ports types], select [Standard
TCP/IP Port] → click [New Port].
The Add Standard TCP/IP Printer Port Wizard starts.
6.
Click [Next].
TOP
Next
6-9