Canon imageCLASS MF7460 Reference Manual page 126

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Document Size
■
You can specify the document size before scanning originals whose
size you need to manually specify, such as transparencies.
– You cannot select [Auto] when scanning the following types of originals.
Specify the size of these documents manually.
– Nonstandard size originals
– Highly transparent originals, such as transparencies
– Originals with an extremely dark background
– STMT or STMTR originals that are placed on the platen glass
– When using Direct Sending for sending a fax, if you place the originals in
the feeder, the Document Size Select setting you specified is disabled.
– If you specify the document size, you cannot use the Stamp or Different
Size Originals mode.
1.
Press (SEND).
2.
Place your originals.
3.
Specify the destination.
4.
Press [Scan Settings].
5.
Press [Option].
6.
Press [Document Size].
7.
Select the document size.
To select an A or B series paper size, press [A/B-size].
8.
Press [Done].
9.
Press [OK].
Back Previous
10.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
– To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
– To cancel all settings and return the machine to the Standard
mode, press (Reset).
Resolution
■
You can specify the resolution before scanning the original.
The following combinations of color mode and resolution are
available:
– B&W (TIFF and PDF)
150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x
300 dpi, 400 x 400 dpi, 600 x 600 dpi
– Color
100 x 100 dpi (JPEG), 150 x 150 dpi (JPEG), 200 x 100 dpi (JPEG),
300 x 300 dpi (JPEG and PDF (Compact))
– The maximum size of an image that you can send at a resolution of 600 x
600 dpi is 11" x 17". If the image exceeds this size, it may be cut off.
– If you send a long original at a resolution of 600 x 600 dpi, the periphery
of the original image may cut off slightly.
– If you are sending documents by fax, the maximum size of an image that
you can send at a resolution of 400 x 400 dpi is 11" x 17".
– If you are sending documents by fax, select B&W 200 x 100 dpi, B&W 200
x 200 dpi, B&W 200 x 400 dpi, or B&W 400 x 400 dpi. Otherwise, the
document will be sent with poor resolution.
1.
Press (SEND).
TOP
Next
(Start) once for
4-15