Canon imageCLASS MF7460 Reference Manual page 92

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
5.
Select the desired type of two-sided layout, then
press [OK].
Details of each item are shown below.
[Left/Right 2-sided]: The facing pages of a book or
bound original are copied on
the front and back sides of a
single sheet of paper.
[Front/Back 2-sided]: The front and back sides of
the left page, or the front and
back sides of the right page, are
copied on the front and back
sides of a single sheet of paper.
6.
Press (Start).
To copy the next two facing pages, turn the page of the original.
Place your original on the platen glass, then press
7.
When scanning is complete, press [Done].
– To cancel this setting, press [2-sided] → [Cancel].
– To cancel all settings and return the machine to the Standard
mode, press (Reset).
(Start).
Back Previous Next
TOP
3-21