Printer Connection Method (Lpd/Raw); Windows 98/Me - Canon MF7280 - ImageCLASS B/W Laser Network Manual

- If you want to use the PCL printer driver
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started,'' in the PCL Driver Guide.
- If you want to use the UFR II printer driver
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started,'' in the UFR II Driver Guide.
- If you want to use the fax driver
See the procedure for alternative printer driver installation in Chapter 2, "Getting
Started,'' in the Fax Driver Guide.

Printer Connection Method (LPD/Raw)

The following is the procedure for specifying the port setting.

Windows 98/Me

■ Installing a New Driver
1
Install the driver.
Install the driver according to the procedures indicated in the Starter Guide.
IMPORTANT
lf your computer fails to transmit data to the printer during installation of the driver,
when the error message appears, click [No] ➞ set the byte count mode to off.
NOTE
•
The print application will be LPD and the print queue will be set to <LP> if the driver
has been installed according to the above procedures.
•
This machine enables you to specify print queues other than <LP>. For details on
print queues and instructions on how to change the settings, see "Changing the
Port after Installing the Driver," on p. 3-26.
Setting Up a Computer for Printing/Sending a Fax
3
3-25