Before Using the
Machine
1
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
–
Load the envelopes, as shown below.
Feeding
Direction
The screen for selecting the paper size appears.
–
The stack bypass can hold 10 envelopes at a time.
–
Envelopes may be creased in the printing process.
4.
Specify the size and the type of the paper you
load.
For details on how to specify the paper size and type, see "Setting
Paper Size and Type for the Stack Bypass, " on p. 2-19.
The paper size/type setting in the [Stack Bypass] setting screen is
available if Stack Bypass Standard Settings is set to [Off ] in Common
Settings (from the Additional Functions screen). If Stack Bypass
Standard Settings is set to [On], copying can be performed only for
the registered paper size and type. (See, "Setting Paper Size and
Type, " on p. 2-18.)
Back
Previous
Next
TOP
2-17