Printer Connection Method (Lpd/Raw); Windows 98/Me - Canon imageRunner 6570 Network Manual

Printer Connection Method (LPD/Raw)

The following is the procedure for specifying the port setting.

Windows 98/Me

■ Installing a New Driver
1
3
3-54
Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
Install the driver.
Install the driver according to the following procedures indicated in the manual
for each driver:
•
If you want to use the PCL printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
PCL Driver Guide
.
•
If you want to use the PS printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
PS Driver Guide
.
•
If you want to use the fax driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
Fax Driver Guide
.
IMPORTANT
If your computer fails to transmit data to the printer during installation of the driver,
when the error message appears, click [No] ➞ set the byte count mode to off.
NOTE
•
The print application will be LPD and the print queue will be set to <LP> if the driver
has been installed according to the above procedures.
•
This machine enables you to specify print queues other than <LP>. For details on
print queues and instructions on how to change the settings, see "Changing the
Port after Installing the Driver," on p. 3-55.