Canon imageCLASS MF7460 Reference Manual page 141

Before Using the
Machine 1
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
2.
Check or change the destination's information.
If the destination has been specified using any method
●
other than New Address tab:
– Check the destination's information, then press [Done].
If the destination has been specified using one of the
●
sending methods in the New Address tab:
– Check or change the destination's information, then press [OK].
Change the destination's information in the same way that you
specified it. (See "Using the New Address Tab, " on p. 4-21.)
Back Previous
If the destination is a group address:
●
– To check the information of registered destinations in a group
address, select one destination at a time, then press [Details].
– Check the destination's information, then press [Done], then
[Done].
Erasing a Destination
■
You can erase a specified destination from the destination list
before you scan your documents.
1.
Select the destination to be erased.
If only one destination is specified, skip this step.
If the destination that you want to check or change is not displayed,
press [▼] or [▲] to scroll to the desired destination.
2.
Press [Erase].
TOP
Next
4-30