Canon imageCLASS MF7460 Reference Manual page 397

Before Using the
Machine 1
Communications Settings
Original and Paper
2
Copying
3
Sending and
Fax Settings
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Continue Printing When Toner Is Out
User Settings
Unit Telephone #
Tel Line Type
Monitor Volume Control
TX Settings
ECM TX
Pause Time
Auto Redial
Redial Times
Redial Interval
Transmission Error Redial
Sets whether the machine continues printing received documents and reports when it is
running out of toner. If you set the machine not to continue printing, the machine stops printing
when the toner starts to run out, and automatically stores the received documents in memory.
– Off
– On
Sets the fax features.
Specifies the basic operation settings in the fax mode.
Registers your fax number (max. 20 characters, including spaces). (See "Set the Machine for
Sending Documents, " in the Starter Guide.)
Selects the telephone line type. (See "Set the Machine for Sending Documents, " in the Starter
Guide.)
– Pulse
– Tone
Sets the volume for the monitor tone that this machine sounds during a fax transmission.
Sets the transmission features.
Sets whether the ECM (Error Correction Mode) transmission is activated.
– On
– Off
Sets the pause time when you insert pause into the dialing sequence. (1sec−15sec)
Sets whether to redial automatically when the other line is busy or a transmission error occurs.
(See "Setting Automatic Redialing (Fax) , " on p. 4-39.)
Sets the number of retries. (1 times−10 times)
Sets period of time before redialing. (2 min.−99 min.)
Sets whether the machine redials automatically when transmission error occurs.
– On
– Off
Back Previous Next
TOP
11-14