Setting Up A Computer For Printing/Sending A Fax; Machine Connection Method (Lpd/Raw) - Canon imageCLASS MF6500 Series Advanced Manual

Advanced Fax
1
Features

Setting Up a Computer for Printing/Sending a Fax

Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
Reports and Lists
6
Troubleshooting
7
Appendix
8
Table of Contents
Index
● Connecting to a TCP/IP Network
All computers that use the machine must have TCP/IP client
software installed and must be enabled for TCP/IP network use.
For details, see the manuals provided with the operating
system.
● Installing the Printer Driver and Specifying the Machine
Destination Setting
To print from a computer, you must install a printer driver and
specify a setting for the machine destination. The machine
destination setting differs depending on the print application
used for printing. Use the following information as a guide to
determine the print application you are using, and then perform
the necessary operations.
LPD: This is the print application generally used with TCP/IP.
Raw: This is a print application used with Windows 2000/XP/
Server 2003. It can print at higher speeds than LPD.
Back Previous
■

Machine Connection Method (LPD/Raw)

1.
Open the printer properties dialog box.
– For Windows 2000, click [Start] on the Windows task bar
→
[Settings] [Printers].
– For Windows XP Professional/Server 2003, click [start] on the
→
Windows task bar [Printers and Faxes].
– For Windows XP Home Edition, click [start] on the Windows
→ →
task bar [Control Panel] [Printers and Other Hardware]
→
[Printers and Faxes].
2.
Right-click the icon of the printer you
installed → select [Properties].
TOP
Next
→
3-22