Canon imageCLASS MF7460 Reference Manual page 254

Before Using the
Machine 1
Using the Remote UI
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The Remote UI software enables you to access and manage the
machine connected to a network using a web browser.
Check the machine status from a network computer
●
Set and control the machine from a computer
●
Starting the Remote UI
■
– If you are using IPv4, before you start the Remote UI, press
Functions) → [System Settings] → [Network Settings] → [TCP/IP Settings]
→ [IPv4 Settings] → [IP Address Settings] and verify the IP address of the
machine. If you do not know the IP address, consult with your network
administrator. (See "IP Address, " on p. 11-29.)
– If you are using IPv6, before you start the Remote UI, press
Functions) → [System Settings] → [Network Settings] → [TCP/IP Settings]
→ [IPv6 Settings] → [Use IPv6] or [Stateless Address Settings] and verify
the IP address of the machine. If you do not know the IP address, consult
with your network administrator. (See "Use IPv6, " on p. 11-31 or "Stateless
Address Settings, " on p. 11-31.)
1.
Start the web browser.
2.
Enter the IP address of the machine in [Address]
or [Location] → press [Enter] on the keyboard.
The Remote UI screen appears.
3.
Enter the ID and password.
– For No Management mode: Select [Administrator Mode] or [End-
User Mode] → enter the password or owner name.
– For Department ID Management mode: Enter the department ID
and password.
– For User Management mode: Enter the User ID and password.
For details on the ID and password, see "Managing the Department/
User ID, " on p. 7-21.
(Additional
(Additional
Back Previous Next
TOP
7-5