Before Using the
Machine
1
If Memory Becomes Full during Scanning
Original and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only)
6
Remote UI (imageCLASS
MF7480/MF7470 Only)
7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
If memory becomes full during the scanning of originals, the
following screens appear on the touch panel display.
The jobs may not be accepted even if <Avail. Memory> on the [Device] tab
of the System Monitor screen has not reached zero percent.
1.
Check the message on the touch panel display,
and press [OK].
Scan the job again when the current job is complete.
Back
Previous
Next
TOP
10-28