Canon imageCLASS MF7460 Reference Manual page 413

Before Using the
Machine 1
System Settings
Original and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network (imageCLASS
MF7480/MF7470 Only) 6
Remote UI (imageCLASS
MF7480/MF7470 Only) 7
System Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
DHCP
RARP
BOOTP
PING Command
IP Address Range Settings
Off
On
Permit/Reject
Register
Single Address
Multiple Addresses
Edit
Erase
DNS Server
DNS Server Address Settings
Primary DNS Server
Secondary DNS Server
DNS Host Name/Domain Name Settings
Host Name
Domain Name
DNS Dynamic Update Settings
Sets whether to automatically obtain an IPv4 address for the machine using a DHCP server
Sets whether to automatically obtain an IPv4 address for the machine using a RARP server.
Sets whether to automatically obtain an IPv4 address for the machine using a BOOTP server.
Checks the TCP/IPv4 network connection.
Sets whether to use the IP address filter function.
Disables the IP address filter.
Enables the IP address filter.
Selects whether to permit or reject access from a specified IPv4 address or IPv4 address range.
Specifies the IPv4 address or IPv4 address range to be restricted.
Specifies a single IPv4 address to be restricted.
Specifies a range of IPv4 addresses to be restricted.
Edits the IP address or IPv4 address range to be restricted.
Erases the IP address or IPv4 address range to be restricted.
Sets the DNS server settings.
Registers the DNS server address.
Registers the primary server address.
Registers the secondary server address.
Registers the host name and domain name of the DNS server.
Registers the host name of the DNS server.
Registers the domain name of the DNS server.
Sets whether to use the DNS server dynamic update function.
– Off
– On
Back Previous Next
TOP
11-30