Table of Contents
Advertisement
OPTIONAL BACKING PLATE INSTALLATION
An optional backing plate is available in either a standard or oversized.
1. Slide the backing plate over unit. Line up flange on backing plate
BACKING PLATE INSTALLATION
with flange on unit and secure with 2 screws from the underside as
shown below.
Proceed with Faceplate install.
Backing Plate
Screws
Diagram 4
Completed backing plate shown with Optional Hampton faceplate
HI400/CI2600
installation
CI2700/HI500 Wood Insert |
17
|
17
Advertisement
Chapters
Table of Contents
