Oversize Cast Faceplate Installation - FPI CI2700 Manual

CI2600/ HI400
5. Reinstall unit door (removed in Step 1), attach the left and right side
rails to the back of the bottom fascia panel using four 7/16'' bolts, slide
each rail upward before tightening. (Rails may need to be bent slightly
outward to get a good fit).
Rail system secured w/bolts
6. Apply the flat self adhesive gasket (not shown) to the face of the unit just
above the fan opening. Install the seal/cushion to line up with the top of
the slide out door. With the door in closed position,take the bottom fascia
and line up the wheels and rails with the rails on the unit. When lined up,
lift up and into the rail system and slide into position.
919-411
Gasket
Rail System
7. Apply self adhesive gasket to protect enamel surfaces from chipping.
Lift the top fascia panel up (use care as it is heavy) and slide down into
the brackets installed on Step 1.
Self adhesive gasket
Back view of Top Fascia Panel lining up with the
8. Re-install bypass rod and bypass knob.
Completed Optional Hampton
Oversize Cast Faceplate
Note: If installing optional cast grill - follow installation instructions in the
manual.
2
installation
brackets on Side Panels
CI2700/HI500 Wood Insert |
25
|
25
06/11/20