Masonry Cover Plate Installation - FPI FP90 Owners & Installation Manual

SLOTTED HOLES ON RIGHT SIDE ONLY
NOTE:
ONCE THE TEMPLATE IS MOUNTED CHECK TO MAKE SURE THE SIDES ARE PLUMB AND 43" (1092mm)
IN WIDTH
FPI FP90 Wood Fireplace

MASONRY COVER PLATE INSTALLATION

THE TOP IS ANGLED BACK AT 5 DEGREES
TO ENSURE THAT THE TEMPLATE FITS TIGHT TO THE
UNIT. THE TOP WILL BECOME MORE UPRIGHT AS THE TEMPLATE
IS TIGHTENED TO THE SURROUND MOUNTING BRACKETS
INSTALL FOUR #8x1/2 SCREWS
AT THESE LOCATIONS TO ATTACH
THE SURROUND TEMPLATE SIDES
TO THE TOP.
NOTE:
SIDES SHOULD BE ASSEMBLED
SO THAT THE 3/4" (19mm)
FLANGES ARE ON THE
INSIDE OF THE OPENING.
43.000" (1092mm)
INSTALLATION
23