FPI CI2700 Manual page 75

Client: FPI
Model: CI2700
Pre-Test Notes
Pre-Test Start Time:
Air Control Setting:
Time
0 min Starting with 1.9 lbs of kindling and ~6 pieces of printer paper, lit fuel with propane torch for 15
seconds; door cracked 3".
1.5 min Door closed down to 1"
3 min Door latched closed
7 min @ 0.8 lbs, added remaining kindling fuel (0.8 lbs) and a couple pieces of start-up fuel (1.5 lbs);
door open 60 seconds
11 min Bypass closed
25 min @ 0.9 lbs, added remaining start-up fuel pieces (3.3 lbs); door open 120 seconds
36 min @2.0 lbs, leveled coal bed, loaded High Fire fuel load, door closed 20 seconds after loading
completed.
56 min Turned fan on high, per manufacturer's instructions
127 min @ 7.0 lbs, adjusted fuel load to bring unburnt pieces forward, in order to achieve uniform
charcoalization
166 min @ 3.5 lbs, leveled coal bed, turned fan off, zeroed scale in preparation of Low Fire fuel loading
Test Notes
Test Burn Start Time:
Air Control Setting:
Time
0 min Fuel loading done in 40 seconds, door closed at 80 seconds, air fully open
6 min Set air to test setting
20 min Turned fan on high, per manufacturer's instructions
42 min Changed front filter on both trains due to plugging
60 min Changed 1-hour filter
849 min End of Test
Test Burn End Time:
Calibration Gas Values:
Calibration Results:
Zero
9:01
Time
CO 0.00
2
CO 0.000
Flue Gas Probe Leak Check:
Technician Signature:
ASTM E3053 Wood Heater Run Sheets
Job Number: 18-447
Run Number: 2
Wood Heater Run Notes
8:16
Full Open
11:04
Fully Closed
1/30/2019 - 1:13
Flue Gas Concentration Measurement
Span Gas
Mid Gas
Pre Test
Mid
9:07
10.09
2.510
Initial: No Leakage
Notes
Notes
CO (%): 16.93 CO (%): 4.330
2
CO (%): 10.00 CO (%): 2.51
2
Span Zero
9:04 9:14
16.93 0.10
4.330 0.023
Final: No Leakage
Date:
Tracking #: 0020
Test Date: 1/29/2019
Post Test
Mid
Span
9:10 9:16
10.11 16.88
2.510 4.303
1/30/2019
Page 1 of 3