FPI CI2700 Manual page 120

Client: FPI
Model: CI2700
Pre-Test Notes
Pre-Test Start Time:
Air Control Setting:
Time
0 min Starting with 1.9 lbs of kindling and ~6 pieces of printer paper, lit fuel with propane torch for 15
seconds; door cracked 3".
1.5 min Door closed down to 1"
3 min Door latched closed
5 min Bypass closed
6 min @ 0.3 lbs, added remaining kindling fuel (1.0 lbs) and a couple pieces of start-up fuel (1.8 lbs);
door open 75 seconds
23 min @ 1.5 lbs, added remaining start-up fuel pieces (3.2 lbs); door open 40 seconds
38 min @1.9 lbs, leveled coal bed, loaded High Fire fuel load, door closed 20 seconds after loading
completed.
59 min Turned fan on high, per manufacturer's instructions
116 min @ 7.0 lbs, adjusted fuel load to bring unburnt pieces forward, in order to achieve uniform
charcoalization
153 min @ 3.7 lbs, leveled coal bed, turned fan off, zeroed scale in preparation of Med. Fire fuel loading
Test Notes
Test Burn Start Time:
Air Control Setting:
Time
0 min Fuel loading done in 40 seconds, door closed at 80 seconds, air fully open
6 min Set air to test setting
20 min Turned fan on high, per manufacturer's instructions
47 min Changed front filter on Train A due to plugging
52 min Changed front filter on Train B due to plugging
60 min Changed 1-hour filter
360 min End of Test
Test Burn End Time:
Calibration Gas Values:
Calibration Results:
Zero
9:25
Time
CO 0.00
2
CO 0.000
Flue Gas Probe Leak Check:
Technician Signature:
ASTM E3053 Wood Heater Run Sheets
Job Number: 18-447
Run Number: 3
Wood Heater Run Notes
10:14
Full Open
12:48
Medium Air Setting – See Photos in Test Folder
18:48
Flue Gas Concentration Measurement
Span Gas
Mid Gas
Pre Test
Mid
9:29
10.08
2.501
Initial: No Leakage
Notes
Notes
CO (%): 16.93 CO (%): 4.330
2
CO (%): 10.00 CO (%): 2.51
2
Span Zero
9:27 7:40
16.93 0.02
4.330 -0.003
Final: No Leakage
Date:
Tracking #: 0020
Test Date: 1/30/2019
Post Test
Mid Span
7:38 7:42
10.03 16.87
2.490 4.309
1/31/2019
Page 1 of 3