CI2600
6. A pply the flat self adhesive to the face of the unit just above the fan
opening. Install the seal /cushion to line up with the top of the bottom of
the low profile faceplate.
NOT EXACTLY AS SHOWN
7. G ently slide the bypass rod through the center hole within the fascia and
also guide the primary air control through the slot in the bottom of the
fascia. Push the faceplate towards the unit, ensuring the bolts in Step 2
slide into the brackets installed in Step 1.
8. Ensure the left and right side bolts on the top of the Low Profile Face-
plate are spaced evenly. The spacing of these bolts is critical to ensure
the faceplate slides into the brackets installed in Step 1.
Gasket
9. Tighten the 7/16'' bolts on the back of the Flat Faceplate
10. Re-install bypass knob and door.
installation
7/16" bolts on back of
Faceplate
Final Install
CI2700/HI500 Wood Insert |
21
|
21