Wireless General Settings - ZyXEL Communications Nebula LTE3301-PLUS User Manual

WiFi6 / IEEE 802.11ax
WiFi6 is backwards compatible with IEEE 802.11a/b/g/n/ac and is most suitable in areas with a high
concentration of users. WiFi6 devices support Target Wakeup Time (TWT) allowing them to automatically
power down when they are inactive.
The following table displays the comparison of the different WiFi standards.
Table 42 WiFI Standards Comparison
WIFI
STANDARD
802.11b
802.11a/g
802.11n
802.11ac
802.11ax
* The maximum link rate is for reference under ideal conditions only.
Finding Out More
See Section 8.10 on page 151

8.2 Wireless General Settings

Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode. We
recommend that you select More Secure to enable WPA3-SAE data encryption.
Note: If you are configuring the Zyxel Device from a computer connected by WiFi and you
change the Zyxel Device's SSID, channel or security settings, you will lose your
connection when you press Apply. You must change the
computer to match the new settings on the Zyxel Device.
Note: If upstream or downstream bandwidth is empty, the Zyxel Device sets the value
automatically.
Note: Setting a maximum upstream or downstream bandwidth will significantly decrease
wireless performance.
Click Network Setting > Wireless to open the General screen.
Chapter 8 Wireless
MAXIMUM LINK
BAND
RATE *
11 Mbps 2.4 GHz
54 Mbps 2.4 GHz and 5 GHz
600 Mbps 2.4 GHz and 5 GHz
6.93 Gbps 5 GHz
2.4 Gbps 2.4 GHz
9.61 Gbps 5 GHz and 6 GHz
for advanced technical information on WiFi networks.
Nebula Mobile Router User's Guide
SIMULTANEOUS
CONNECTIONS
1
1
1
4
128
133
wireless
settings of your
wireless