Figure 4-3 Remote Node Network Layer Options; Table 4-2 Remote Node Network Layer Options - ZyXEL Communications PRESTIGE 650H-13 User Manual

Step 2. Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes, then press
[ENTER] to display Menu 11.3 – Remote Node Network Layer Options.
IP Options:
Press ENTER to Confirm or ESC to Cancel:
The next table explains fields in Menu 11.3
FIELD
IP Address Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
Assignment node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the
ISP node (also the one you configure in menu 4), all other nodes are
set to Static.
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet Type the subnet mask assigned to the remote node.
Mask
My WAN Addr Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.
NAT Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your Prestige.
Remote Node Configuration
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Version= None
Multicast= None
IP Policies= 3,4,5,6
Rem Node Name= myISP

Figure 4-3 Remote Node Network Layer Options

Table 4-2 Remote Node Network Layer Options

Bridge Options:
Ethernet Addr Timeout (min)= 0
Route= IP
Remote Node Network Layer Options.
–
DESCRIPTITON
Prestige 650H ADSL Router
EXAMPLE
Static
Feature
Full
4-7