Noise Level; Slopes; Cutting Unit Specification; Cutting Performance - Ransomes Mastiff 91 Safety, Operation & Maintenance Manual

12 SPECIFICATIONS

12.5 NOISE LEVEL ________________________________________________________

When the machine was tested for sound pressure (Operator Ear).
The Machinery Safety Directive 2006/42/EC
And
Exposure Of Workers To The Risks Arising From Physical Agents (Noise) Directive 2003/10/EC
By compliance to:
The Lawnmower Standard BS EN ISO 5395:2013
And
Sound Pressure Standard EN ISO 3746: 2010
Measured Sound Pressure 87 dB(A) ± 0.86
When the machine was tested for sound power (Noise in the Environment).
The Machinery Safety Directive 2006/42/EC
And
Noise Emission In The Environment By Equipment For Use Outdoors
Directive 2000/14/EC
By compliance to:
Sound Power Standard EN ISO 3744:2010
Measured Sound Power 97 dB(A) ± 0.86

12.6 SLOPES _____________________________________________________________

DO NOT USE ON SLOPES GREATER THAN 16°. The 16° slope was calculated using static stability
measurements according to the requirements of BS EN ISO 5395

12.7 CUTTING UNIT SPECIFICATION _________________________________________

Construction
Reel Length
Number of Knives
Reel Speed
Front Roll
Fixed Head Height of Cut (Standard Blade)
Rear Roll
Height of Cut Adjustment
Cylinder to Bottom Blade Adjustment
Transmission
NOTE
These cutting units are made to cut grass of maximum height 82 mm down to the available height of cut range.

12.8 CUTTING PERFORMANCE ______________________________________________

91m (36inch) width of cut:
0.41 hectares/hr. At 4.8 kph.
1 acres / at 3mph
en-52
All welded 5 knife cylinder
91cm (36 inches)
6 or 9
1043 rpm
One piece steel
13- 35mm (0.5 - 1.38 inches)
3 piece cast iron with brake
Locknut and pivot bracket
Threaded Adjuster
Centrifugal clutch and heavy roller chain