Table of Contents
Advertisement
12 QUALITY OF CUT
12.11
LAYING UNCUT GRASS___________________________________________
NOTE: Arrow indicates direction of travel.
Possible Cause
Mowing (ground) speed is too fast.
HOC set close to the actual grass height.
Excessive cut grass wrapped on the front of the cut-
ting blades resulting in blunt blades beating the grass
down. (Flail Unit Only)
Grass always cut in same direction.
Unit blocking or jammed.
1
en-126
"Laying uncut grass." This problem is identified by
areas of grass that have been left uncut and laid flat.
TN1234
Cut more frequently, increase HOC.
Reduce HOC.
Cut when grass conditions improve. Remove
excessive grass build up. Sharpen or replace
damaged blades.
Cut grass in opposite direction.
Clear unit of compacted grass or foreign objects.
Correction
Advertisement
Table of Contents
