Table of Contents
Advertisement
Blade Dimensions
Adding/Deleting
Blade Dimensions
The overhead control panel is capable of storing
the dimensions of up to ten different blades. This
information is critical when setting up the rip fence
to make precision cuts.
Adding Blade Dimensions
1.
Press Tool-Box key on overhead control
panel (see Figure 91).
F1
mm
F2
inch
F3
CAL.
F4
PROG.
F5
START
Figure 91. Location of Tool-Box key.
2.
Use F2 and F3 keys to scroll up or down to
an open line (see Figure 92).
Tool-Box
No
01
20.0mm
3.2mm
02
22.0
3.6
mm
03
26.0
3.5
mm
04
28.0
3.8
mm
05
06
07
08
09
10
Figure 92. Tool-Box blade dimension screen.
-52-
+
7
8
9
-
4
5
6
x
1
2
3
-
0
CE
M+
M-
STOP
F1
F2
mm
mm
F3
mm
F4
F5
3.
Press F4 key to go to Tool-Box Edit screen
(see Figure 93).
Tool-Box Edit
No: 01
300
. 0
2 . 5
1
Figure 93. Tool-Box Edit screen.
4.
Press F2 key, enter blade diameter, and
press F2 again to save.
5.
Press F3 key, enter blade thickness, and
press F3 again to save.
Note: On machines manufactured before
June, 2021, blade dimensions can only be
entered in metric values. To upgrade to new
metric/standard computer chip, order PN
P08531655-1.
6.
Press F5 key to save new dimensions to
database.
7.
Press F1 key to return to main screen.
+
7
8
9
Deleting Blade Dimensions
-
mm
4
5
6
1.
Press Tool-Box key on overhead control
inch
panel (see Figure 91).
x
1
2
3
CAL.
-
2.
Use F2 and F3 keys to scroll through list, and
0
CE
PROG.
stop on line to be deleted.
M+
M-
START
STOP
3.
Press and hold F5 key for three seconds to
delete line.
4.
Press F1 to return to main screen.
Model G0853 (Mfd. Since 07/18)
mm
mm
F1
-
mm
F2
inch
F3
CAL.
-
F4
PROG.
F5
START
S
Advertisement
Table of Contents
