Grizzly G0853 Owner's Manual page 10

Overhead Control Panel (Lower)
AK
AL
AS
AK. Blade Tilt Readout. Displays current angle
of saw blades.
AL. Digital Readout Reset Key. Press and hold
for three seconds to reset readout to zero.
AM. Main Blade ON Button. Enables power to
main blade.
AN. Main Blade OFF Button. Stops main blade
and scoring blade.
AO. Emergency Stop Button. Stops both motors
and disables control panel. To reset, twist
clockwise until button pops out.
-8-
AR AQ
Figure 7. Overhead control panel functions (lower).
AM AN
AP
AP. Scoring Blade ON Button. Enables power
to scoring blade.
Note: Main blade must be ON for scoring
blade to start.
AQ. Blade Up & Down Switch. Increases or
decreases height of main blade.
AR. Blade Tilt Micro-Adjust Button. Increases
angle of saw blades in increments of 0.1°.
AS. Blade Tilt Switch. Increases or decreases
angle of saw blades anywhere between
0°–45°.
Model G0853 (Mfd. Since 07/18)
AO