Table of Contents
Advertisement
Rip Fence
I
Figure 3. Rip fence controls.
I.
Rip Fence Face. Can be positioned for stan-
dard cutting operations or in lower position for
blade guard clearance during narrow ripping
operations.
J.
Slide Lock Handle. Secures aluminum fence
face on its forward/backward slide track to
support workpiece.
K. Rip Fence Release Button. Releases fence
base from leadscrew so fence can be reposi-
tioned manually.
Miter Fence
N
L
M
Figure 4. Miter fence controls.
L.
Flip Stop. Used for quick, precise measure-
ments for repeatable cuts when using miter
fence.
M. Miter Fence Scale. Helps measure length of
cut during miter operations.
-6-
N. Lock Knob. Secures position of miter fence
O. Hold-Down. Quickly clamps workpiece to
P. Miter Gauge. Helps measure angle of cut
J
K
Saw Blades
Q. Riving Knife. Maintains kerf opening during
R. Main Blade. Performs cutting operation.
S. Scoring Blade. Rotates in opposite direction
O
P
on sliding table.
sliding table.
during miter operations.
Q
Figure 5. Saw blades.
cutting operations. This function is crucial to
preventing kickback caused by the kerf clos-
ing behind the blade.
of main blade and pre-cuts the surface of the
workpiece before actual cutting operation
is performed to reduce tearout or chipping.
Scoring blade is adjustable for kerf thickness
and alignment with main blade.
Model G0853 (Mfd. Since 07/18)
R
S
Advertisement
Table of Contents
