Changing Main Blade Height; Changing Blade Angle - Grizzly G0853 Owner's Manual

Changing Main
Blade Height
The main blade is raised and lowered by rotating
the blade height switch shown in Figure 94. Rotate
the switch clockwise to raise the blade; rotate it
counterclockwise to lower the blade. Rotate and
hold the switch for continuous movement.
Figure 94. Location of main blade height switch.
Model G0853 (Mfd. Since 07/18)
Main Blade
Height Switch
Changing
Blade Angle
The angle of the saw blades can be changed
using the blade tilt switch or the blade tilt micro-
adjust button on the overhead control panel. Both
methods change the blade angle in 0.1° increments,
anywhere from 0°–45°. Use the switch for making
large, quick adjustments to blade tilt, and use the
button for making small, more refined changes.
Changing Blade Angle w/Tilt Switch
1. Rotate blade tilt switch (see Figure 95) clock-
wise to increase blade angle, and counter-
clockwise to decrease blade angle.
Tip: Rotate and hold switch for continuous
movement.
2.
Monitor changes to blade angle in blade tilt
readout (see Figure 95), and release switch
when desired angle is reached.
Blade Tilt Switch
Figure 95. Controls for adjusting blade tilt.
Changing Blade Angle w/Micro-
Adjust Button
1. Press blade tilt micro-adjust button once to
increase blade angle 0.1°.
Tip: Press and hold button down for continu-
ous movement.
2. Monitor changes to blade angle in blade tilt
readout (see Figure 95), and release button
when desired angle is reached.
Blade Tilt
Readout
Micro-Adjust Button
-53-