Lifting & Placing Saw - Grizzly G0853 Owner's Manual

Lifting &
Placing Saw
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
To lift and place saw:
1. Position crate as close to installation location
as possible.
2. Remove top of crate. Position forklift forks as
wide as they can be while still fitting under
center opening (see Figure 18).
Figure 18. Example of how to insert forks for
lifting table saw off pallet.
Model G0853 (Mfd. Since 07/18)
HEAVY LIFT!
3. Remove small items packed around saw and
unbolt saw from pallet.
DO NOT lift saw any higher than necessary
to clear pallet. Serious personal injury and
machine damage may occur if safe moving
methods are not followed.
4.
With an assistant holding each end to help
stabilize load, lift saw with forklift just high
enough to clear pallet, and move it to your
predetermined location.
5. Lower saw onto ground and back forklift
away.
-27-