System Maintenance; Upgrade Firmware - EverFocus EDN288MS User Manual

7.1.6. System Maintenance

7.1.5.1. Upgrade Firmware

Click the Browse button to find a previously prepared firmware upgrade file. Click the Upload
button to install the new firmware. You can also upgrade firmware using IP Utility, see
Upgrading Firmware Using IP
Note:
1. System updating should only be accomplished by trained staff.
2. Do not disconnect power to the IP camera during the upgrade sequence. The IP camera
will reboot automatically after the upgrade has completed (1-5 minutes).
Stainless Steel 2MP/3MP/4MP Network Cameras
Utility.
36
8.