Table of Contents
Advertisement
EAN7360 / EHN7360 / EZN7360
7.1.5. System Maintenance
7.1.5.1. Upgrade Firmware
Click the Browse button to find a previously prepared firmware upgrade file. Click the Update
button to install the new firmware. You can also upgrade firmware using IP Utility, see
8.
Upgrading Firmware Using IP
Utility.
Note:
1. System updating should only be accomplished by trained staff.
2. Do not disconnect power to the IP camera during the upgrade sequence. The IP camera will
reboot automatically after the upgrade has completed (1-5 minutes).
7.1.5.2. Auto Reboot
You can manually reboot the IP camera, or set up a schedule for the system to reboot
automatically using this page.
Select OFF to disable the Auto Reboot function, or select an interval for the Auto Reboot function
from every day, every monday to every sunday. The IP camera will automatically reboot at the
specified time. Click the Reboot button to manually reboot the IP camera.
47
Advertisement
Table of Contents
