Mount The Cabinet - Graco HydroShield WABH00 Instructions - Parts Manual

Installation
Mount the the Cabinet Cabinet
Mount Mount the Cabinet
To reduce the risk of fire and explosion, do
not install equipment approved only for a
non-hazardous location in a hazardous location.
Mount the cabinet on the wheels, on the wall, or on
the floor.
Always use proper equipment, such as a forklift, to
move or lift the system.
Install the the Optional Optional Wheels
Install Install the Optional
Install wheels to help with installation.
1. With two people, remove the system from the
pallet.
2. Install the wheels (95), washers (96), and nuts
(97). Tighten the nuts securely.
3. Install the end plugs (3a, 3b).
4. When the system is in the desired location, lock
all four wheels.
Figure 4 Wheel Mount Parts
14
Wheels
Wheels
Mount Mount on Mount on on the the the Wall Wall Wall
Before mounting the isolation cabinet to the wall,
make sure that the wall can support the weight of the
system. See Technical Specifications, page 140
the weight.
1. Select and attach the appropriate mounting
hardware to the stand.
2. Drill holes into the wall based on the selected
hardware.
A mounting hole pattern is provided on each side
of the frame.
Figure 5 Hole Pattern for Wall Mounting
3. With two people, remove the isolation system
from the shipping pallet.
for
3A8492A